Dear all,
here is the situation I met in my company :
My production ordrers are defined in a collective order model.
A consums B
B consums C and D
C consums D
When I create an order, here is the result
Order for A
Order for B
Order for C
Order for D
Order for D
In reality, we would like to get only one order in my collective Order model for product D.
Is there a way to ask SAP to creeate only 1 order by product, Inside a collective order ?
Thansk for your help
Pierre
Hi All,
There can be different employees(PERNRs) who can work on a confirmation linked to a Production Order/Operation simultaneously.
My requirement is before an employee does a final confirmation to a Confirmation, I need to check whether there are any open time tickets
that are created by other employees( i.e if other employees are still active on that confirmation) and if yes I have to display the list of employees that are still active on that confirmation.
Do we have a function module for this? What should be the approach?
Regards,
Rahul.
Hi gurus,
Need some guidance on the scenario below :
MRP run for material A
MRP type : VB
Lot size: EX
Maximum Lot Size : 200
Material A is a component of material Z. From a previous planned order of material Z, the requirement quantity of material A is 5000.
Now, after the MRP run for material A was done, a PR was generated with quantity of 5000.
My question is why was the PR generated with the requirement quantity of 5000 and not only did not obey the maximum lot size but exceeded it as well?
Thanks.
Hi,
In planning table, not able to see the required hours and available hours. Means required capacity and available capacity. can you help.
BR,
sam
The last week some people created a transport for transaction COR4 and we lost the information of the table s026, we need restructure this information again.
We lost the information of the last 3 years, only we have the new movements of consumption.
How we can rebuild this table (S026)?
Hi experts can you please tell me what is the difference means strategy and LSF VSF functions
Dear Expert ,
Our organization is a nature of process industry and production plan are changing frequently , as result every time we need modify PIR and then we have perform MRP RUN through t-code MD02 . This is very tedious to end user .
Hence we want to develop a tool , after changes of plan figure , at the end day , from PBIM and PBED combination, MRP RUN will run will perform atomically.
Please help me how to do the configuration .
Regards,
Amit Biswas
Dear Expert ;
I want to allow the scheduling in the past only in LTP.
I maintain scheduling type as backward 365 days ( in OPU5) on my scenario but it does not work .
so I add start in the past in " paramter for determining the basic dates" it work in my scenario and also in the real time ?
I just want this option in LTP .
any help?
Hi Friends,
Can we get a report were we can know that how many production order are created without reference to planned order.
We know how to find out through co02 but we want to check out for multiple orders.
Kindly help.
Regards,
Sun
Hi,
We prepare annual forecast outside the sap system. production plan and its mrp is done for make to order and make to stock materials which gives actual raw materials purchasing figure. But comparsion for raw materials requirement as per annual forecast is done outside sap. so can you suggest how can we do this from sap, so that we get requirement of raw materials against annual budget, actual requirement from mrp and balance requirement against budget forecast.
Regards,
sun
Hi there,
Sample BOM
FERT - 1000pc
.. ROH-A - 1000pc
.. ROH-B - 1000pc
So my BOM for FERT will consume 1000pc for every 1000pc produced
My question is that, if i create a Production Order for 1000pc, so during my confirmation, under the Documented Goods Movement, there will be two lines
ROH-A 261 1000pc
ROH-B 261 1000pc
Is there a place to set the tolerance? Meaning the user cannot consumer more than a certain %?
I know that this can be captured by Finance during month end when they see the variance. But Finance wants to prevent before it happens
Hi,
I have a requirement that of consolidated report of CA61 & CA62. In the output of transaction CA61 & CA62, i am not able to find in which table the data is stored for few things.
Below is the screen shot attached:
In this
1) Object
2) Item
3) Changed Object
4) Old Value
5) New value
Can anyone help me is there any functional module to get these details.
Thanks in advance
Regards,
V Kumar
Hi PP experts,
Do you know how many materials can be inputted into CA98 in one time?
Regards,
Steve
Hi All,
Can you Pl let us know the BAPI for Process order confirmation which are done by COR6.
Requirement is, we want to Partial confirm the Process order with Goods Movement as 261 ( Goods Issue For components)
Currently I am using FM- BAPI_PROCORDCONF_CREATE_HDR.
After executing this FM , it is giving me message as Process order confirmed but actually No Goods movement is posted and PCNF status is not marked.
Can you Pl suggest if any step/ data is missing.
Thanks in advance.
Regards,
Sachin
Dear experts,
I contact you to get some advices on master data creation for PP : material, production BOM and routing.
Indeed, my objective is to automate data creation between a PLM tool (out of SAP) and SAP PP : basically, 90% of data
would be created in PLM tool and then transfered into SAP via interface.
I am looking for your advices on the best practices to implement such process :
What should be considered on both sides (PLM+PP) to run proper interface ?
What are your watch out in term of troubleshooting ?
Any experience or learning you can share ?
All kind of tips / advices / recommendations / warnings…
Thanks a lot in advance for your help !
hi,
we have MD4C report where we want to download the output of that report
with few fields.
Problem here is that it displays/downloads all the fields of which few
we do not need. So when we checked the layout it displays a default
layout.
Now is it possible that we can create a layout for the fields which we
need. Because we tried but its not giving the output as needed.
Please assist.
Thanks & Regards,
Nikhil
As the requirement costing need to calculate the costing for the labors that drive the work center
They want to add the activity type price by labor
The case is the work center has 3 labors and in some time could be 2 labors
According to that I made the below formula in work center costing tab
(SAP_02 * SAP_09 * SAP_17 / SAP_08 )
And assigned it to the work center as below
Activity rate for machine 7 EGB & for labor 5 EGB
So formula calculate right as the formula test
100 Pc per hour and operation will be 200 so need 2 hours from
In routing I said there are 3 employees and 100 for 1 hour for machine and labor
In production order by 500 PC found the formula calculating right
In confirmation I made for 300 PC with 3 labors as below
Regards
Plant 1000 - Finished product A - this product sold only to customers
plant 2000 - Product B - this product is sold to customers and also to plant 1000
for product B we want to use MTO scenario (but we will plan components of product B) and for finished product A we want to use MTS scenario.
there will be STO's placed on plant 2000 from plant 1000 for product B. if I use MTO strategy for product B in 2000, how can I make the STO coming from plant 1000 behave like a sales order? what strategy shoudl I used for MTO product B...
Hi All,
When i am deleting BOM line item with Goods movements screen during production order confirmation. following impacts are occuring.
Stock overview MMBE: - Before
Production confirmation BOM component is showing as reserved when I am deleting
BOM line item during production order confirmation & saving. Reservation
gets finished without Goods issue.
Missing Parts List CO24:-
Before Production confirmation BOM component is showing as missing parts in
CO24. When I am deleting BOM line item during production order confirmation
& saving. Missing Part list is not available any more in CO24.
COGI :- When I am deleting
BOM line item during production order confirmation & saving. In COGI component
is not available for Goods Issue anymore.
Requirement:- Deleted BOM
items should be available in COGI, MMBE as well as in CO24 whether COGI allowed or not.
All,
We know that for strategy 82, one can have PO directly created and hence linked to the Sales Order.
Understand that checking control needs to be set up for the plant , order type combination.
A.] How can we influence the order type of the PO that gets created automatically? Say a ZP04 order type was created and I'd like to have this order type selected for PO creation whenever I create the SO.
B.] Also, if Sales order did have any blocks set up; will the PO get created after the blocks are released or at the instance when we save the SO?
Thanks.